How to tune channels on Thomson 65UG6400

How to tune channels on Thomson 65UG6400

Scan (or rescan) for channels on Thomson 65UG6400

If you just bought an Thomson 65UG6400 TV with the Android Android P (9.0), v11 Q4 ‘ operating system or you bought it a long time ago and you do not remember how to search and tune the channels, we will tell you how to search for cable or DTT channels step by step and with images.

IMPORTANT: When you start the channel search on your Thomson 65UG6400 the channels currently stored on your television and their order will be deleted and replaced by the new channels found, stored in the order in which they are found.

The Thomson 65UG6400 has the following tuner features:
Digital signal format system: DVB-C,DVB-S2,DVB-T2.

Estimated time: 15 minutes.

You will need:

- TV remote

If you don't have a remote you can buy one from this link on Amazon. *

- Antenna or satellite cable

1- First step:

Turn on your Thomson 65UG6400 and press the settings button on the remote control, if your remote control does not have this button press the "Home" button, it is the button with the drawing of a house. Once it appears select settings from the TV menu.

2- Second step:

Using the direction buttons on the remote control, scroll down to select the "Channels" section. Press "OK" on the remote control to access the channel settings of the Thomson 65UG6400 TV 165.1 cm (65") 4K Ultra HD Smart TV Wi-Fi Black.

3- Third step:

The first section that should appear is "Channel Scan", use the direction button on the remote control again to select this section and press "OK" to continue tuning the television channels on the Thomson 65UG6400.

4- Four step:

Within the “Channel Scan” section, various information will appear to configure, first check that the country/region is correct. Select the “Scan Automatically” section to continue tuning the channels on the Thomson 65UG6400.

5- Fifth step:

Now you must define whether you want to tune into the antenna or cable channels and the type of channel, which will normally be digital. For most cases you can leave the default settings and press “Search” to start searching for channels.

6- Sixth step:

The Thomson 65UG6400 will take several minutes to complete the channel search, you will be able to see the progress and the number of channels found. Be patient and once it reaches 100%, click on "Finish" and you can start watching the channels and then sort them.