If you just bought an Haier LE32U5000A TV with the Android operating system or you bought it a long time ago and you do not remember how to search and tune the channels, we will tell you how to search for cable or DTT channels step by step and with images.
IMPORTANT: When you start the channel search on your Haier LE32U5000A the channels currently stored on your television and their order will be deleted and replaced by the new channels found, stored in the order in which they are found.
Estimated time: 15 minutes.
You will need:
- TV remote
If you don't have a remote you can buy one from this link on Amazon. *
- Antenna or satellite cable
1- First step:
Turn on your Haier LE32U5000A and press the settings button on the remote control, if your remote control does not have this button press the "Home" button, it is the button with the drawing of a house. Once it appears select settings from the TV menu.
2- Second step:
Using the direction buttons on the remote control, scroll down to select the "Channels" section. Press "OK" on the remote control to access the channel settings of the Haier LE32U5000A 32 inch LED HD-Ready TV.
3- Third step:
The first section that should appear is "Channel Scan", use the direction button on the remote control again to select this section and press "OK" to continue tuning the television channels on the Haier LE32U5000A.
4- Four step:
Within the “Channel Scan” section, various information will appear to configure, first check that the country/region is correct. Select the “Scan Automatically” section to continue tuning the channels on the Haier LE32U5000A.
5- Fifth step:
Now you must define whether you want to tune into the antenna or cable channels and the type of channel, which will normally be digital. For most cases you can leave the default settings and press “Search” to start searching for channels.
6- Sixth step:
The Haier LE32U5000A will take several minutes to complete the channel search, you will be able to see the progress and the number of channels found. Be patient and once it reaches 100%, click on "Finish" and you can start watching the channels and then sort them.
Has it been useful?
About the device:
The Haier LE32U5000A it is a television with the Android operating system, an aspect ratio of 16 : 9, a refresh rate of 60 Hz, 3 HDMI ports, 3 USB ports, a screen resolution of HD ready, 1366 x 768 Pixels pixels, Wi-Fi, Ethernet port (RJ45), dimensions of 0 cm width, 0 cm height and 0 cm depth.
There are no questions yet about "How to tune channels on Haier LE32U5000A", you can write the first one.
* Some of the links in this article are affiliates, which means that when you buy one of those products we will receive a small commission that will allow us to continue offering quality and updated content, and it will not cost you anything since you will continue paying the same price.