Factory reset Toshiba 40L5400

How to reset or hard reset an Toshiba 40L5400 40 inch LED Full HD TV

If your TV Toshiba 40L5400 won't turn on, freezes, or isn't functioning correctly and you want to reset everything, or if you want to sell or give it away, you can perform a factory reset to restore it to the state it was in when you first bought it.

IMPORTANT: Resetting your Toshiba 40L5400 to its factory settings will erase all personalized configurations, such as tuned channels and their order, input names, language, timer settings, etc.

The Toshiba 40L5400 TV will need to be fully set up again as if it were being turned on for the first time after purchase.

Each TV may have a different menu layout, but you can follow the steps described here or consult the user manual for the 40L5400. Here, you'll find instructions for two types of menus; if your Toshiba 40L5400's menu doesn't match the first guide, refer to the second one.

Estimated time: 15 minutes.

Table of Contents:

First manual to restore Toshiba 40L5400

You will need:

- TV remote

If you don't have a remote you can buy one from this link on Amazon. *

1- First step:

Press the "Menu" button on the Toshiba 40L5400 40 inch LED Full HD TV remote control or the "Menu" button on the TV to open the TV settings menu.

2- Second step:

Using the button on the remote control with an arrow on the right, press it several times until you select the "Setup" section, as you can see in the image below, it has a cogwheel icon. Press the "OK" button on the remote control to access it.

3- Third step:

Press the button on the remote control that has a down arrow to select the "Installation" section, press the "OK" button on the remote control to continue.

4- Four step:

Again, using the down arrow button on the Toshiba 40L5400 remote control, select the "System information" section and press "OK" on the remote control to confirm.

5- Fifth step:

Press the right arrow button on the remote to select "Factory Defaults".

6- Sixth step:

Press the down arrow button on your remote to scroll down and use the right arrow button to select "Yes". Press "OK" on the remote to continue with the factory reset of the Toshiba 40L5400.

7- Seventh step:

A confirmation message will appear to avoid restoring the Toshiba 40L5400 by mistake, if you are sure to carry out this process use the arrows on the remote control to select "Yes" and press "OK" on the same remote control to confirm the restoration of the television.

8- Eighth step:

Unplug the TV from the power, wait a minute, and plug it back in to complete the reset of the Toshiba 40L5400.

Second manual to restore Toshiba 40L5400

As in the previous step, press the "Menu" button on the Toshiba 40L5400 remote control or the "Menu" button on the TV to open the TV settings menu.

1- Using the directional buttons on the Toshiba 40L5400 remote control, navigate left or right until you find the "Settings" section. Press "OK" on the remote control to access the settings.

2- Using the button on the remote control that has an arrow on the right, press it several times until you select the "Setup" section, as you can see in the image below. Press the "OK" button on the remote control to access it.

3- Press the button on the remote control that has a down arrow to select the "Reset TV" section, press the "OK" button on the remote control to continue.

4- Again, using the right or left arrow button on the Toshiba 40L5400 remote control select "Yes" and press "OK" on the remote control to confirm.

5- Unplug the TV from the power, wait a minute, and plug it back in to complete the reset of the Toshiba 40L5400.

Has it been useful?

About the device:

The Toshiba 40L5400 it is a television with the Toshiba TV Smart Center operating system, a refresh rate of , 3 HDMI ports, 2 USB ports, a screen resolution of Full HD, 1920x1080 Pixels pixels, Wi-Fi, Ethernet port (RJ45), dimensions of 0 cm width, 0 cm height and 0 cm depth.

Questions and answers from users about "How to reset Toshiba 40L5400 - Factory reset and erase all data"

There are no questions yet about "How to reset Toshiba 40L5400 - Factory reset and erase all data", you can write the first one.

Buy related accessories *

* Some of the links in this article are affiliates, which means that when you buy one of those products we will receive a small commission that will allow us to continue offering quality and updated content, and it will not cost you anything since you will continue paying the same price.