Factory reset Toshiba 32P2400

Factory reset Toshiba 32P2400

How to reset or hard reset an Toshiba 32P2400 32 inch LED HD-Ready TV

If your TV Toshiba 32P2400 won't turn on, freezes, or isn't functioning correctly and you want to reset everything, or if you want to sell or give it away, you can perform a factory reset to restore it to the state it was in when you first bought it.

IMPORTANT: Resetting your Toshiba 32P2400 to its factory settings will erase all personalized configurations, such as tuned channels and their order, input names, language, timer settings, etc.

The Toshiba 32P2400 TV will need to be fully set up again as if it were being turned on for the first time after purchase.

Each TV may have a different menu layout, but you can follow the steps described here or consult the user manual for the 32P2400. Here, you'll find instructions for two types of menus; if your Toshiba 32P2400's menu doesn't match the first guide, refer to the second one.

Estimated time: 15 minutes.


Table of Contents:


First manual to restore Toshiba 32P2400

You will need:

- TV remote

If you don't have a remote you can buy one from this link on Amazon. *

1- First step:

Press the "Menu" button on the Toshiba 32P2400 32 inch LED HD-Ready TV remote control or the "Menu" button on the TV to open the TV settings menu.

Toshiba TV remote control

2- Second step:

Using the button on the remote control with an arrow on the right, press it several times until you select the "Setup" section, as you can see in the image below, it has a cogwheel icon. Press the "OK" button on the remote control to access it.

Toshiba TV settings

3- Third step:

Press the button on the remote control that has a down arrow to select the "Installation" section, press the "OK" button on the remote control to continue.

Installation Toshiba TV

4- Four step:

Again, using the down arrow button on the Toshiba 32P2400 remote control, select the "System information" section and press "OK" on the remote control to confirm.

System information Toshiba TV

5- Fifth step:

Press the right arrow button on the remote to select "Factory Defaults".

Factory defaults Toshiba TV

6- Sixth step:

Press the down arrow button on your remote to scroll down and use the right arrow button to select "Yes". Press "OK" on the remote to continue with the factory reset of the Toshiba 32P2400.

Restore Toshiba TV

7- Seventh step:

A confirmation message will appear to avoid restoring the Toshiba 32P2400 by mistake, if you are sure to carry out this process use the arrows on the remote control to select "Yes" and press "OK" on the same remote control to confirm the restoration of the television.

Confirm restoration Toshiba TV

8- Eighth step:

Unplug the TV from the power, wait a minute, and plug it back in to complete the reset of the Toshiba 32P2400.

Second manual to restore Toshiba 32P2400

As in the previous step, press the "Menu" button on the Toshiba 32P2400 remote control or the "Menu" button on the TV to open the TV settings menu.

1- Using the directional buttons on the Toshiba 32P2400 remote control, navigate left or right until you find the "Settings" section. Press "OK" on the remote control to access the settings.

Toshiba TV settings

2- Using the button on the remote control that has an arrow on the right, press it several times until you select the "Setup" section, as you can see in the image below. Press the "OK" button on the remote control to access it.

Installation Toshiba TV

3- Press the button on the remote control that has a down arrow to select the "Reset TV" section, press the "OK" button on the remote control to continue.

Restore Toshiba TV

4- Again, using the right or left arrow button on the Toshiba 32P2400 remote control select "Yes" and press "OK" on the remote control to confirm.

Confirm restoration Toshiba TV

5- Unplug the TV from the power, wait a minute, and plug it back in to complete the reset of the Toshiba 32P2400.

Has it been useful?

About the device:

The Toshiba 32P2400 it is a television with the Toshiba TV Smart Center operating system, an aspect ratio of 0,67292, a refresh rate of , 1 USB ports, a screen resolution of HD Ready, 1366 x 768 Pixels pixels, a screen diagonal of 32 Inch cm, dimensions of 0 cm width, 0 cm height and 0 cm depth.

Questions and answers from users about "How to reset Toshiba 32P2400 - Factory reset and erase all data"

There are no questions yet about "How to reset Toshiba 32P2400 - Factory reset and erase all data", you can write the first one.

Buy related accessories *

* Some of the links in this article are affiliates, which means that when you buy one of those products we will receive a small commission that will allow us to continue offering quality and updated content, and it will not cost you anything since you will continue paying the same price.

Other tutorials for the Toshiba 32P2400:

Specifications
Compare
FAQ