Factory reset Shibuyi 40S-SA

How to reset or hard reset an Shibuyi 40S-SA

If your Smart TV Shibuyi 40S-SA works very slow, it hangs, or you have a full memory and you want to erase everything, or you want to sell it or give it away and you want nobody to be able to access your history and passwords you can do a factory reset or format so that it returns to be like the first day.

IMPORTANT: formatting or resetting your Shibuyi 40S-SA to its factory state will eliminate all the personalized settings of the television such as the tuned channels and their order, input names, applications that have been installed, passwords of the accounts linked to this 40S-SA, Wi-Fi passwords, Google Play user and web browsing history.

The Shibuyi 40S-SA TV will need to be fully configured as when it was turned on for the first time after purchase.

Estimated time: 15 minutes.

Table of Contents:

Restore from the options of Shibuyi 40S-SA

You will need:

- TV remote

If you don't have a remote you can buy one from this link on Amazon. *

1- First step:

First go to the start menu of your Shibuyi 101.6cm (40 inch) Full HD LED Smart TV (40S-SA) TV, once you have it in front of you, go to the settings, it is the gear wheel icon in the upper right part of the screen of your Shibuyi 101.6cm (40 inch) Full HD LED Smart TV (40S-SA):

2- Second step:

Navigate through the menu of the 40S-SA TV until you find the section called "Storage and reset", press to access the storage settings and factory restore.

3- Third step:

Once inside the Shibuyi 40S-SA Storage and reset settings, look for the "Factory data reset" section with your remote or cursor and click on it.

4- Four step:

A confirmation message will appear on the screen of the Shibuyi 40S-SA indicating that all the information on the television 40S-SA will be deleted, including the settings, the downloaded applications and the link with your Google account (the Google account is not deleted, only unlinked from the TV), click on "Factory data reset" again, if you have decided not to continue click "Cancel" and no data will be deleted.

5- Fifth step:

A second confirmation message will appear to confirm that you want to restore the Shibuyi 40S-SA, from this step you cannot go back, all apps and settings will be removed from the TV.

Press "Erase everything" to finish and wait a few seconds for the 40S-SA to be completely restored.

Restore Shibuyi 40S-SA without the remote control

If you don't have the Shibuyi 40S-SA remote control, your TV has entered a reboot loop or is unresponsive, you can factory reset your Shibuyi using the physical buttons on the back, bottom, or side of the TV.

1- First of all, locate the power, volume up and volume down buttons of the Shibuyi 40S-SA.

They must be located on the back of the TV, on its right side or at the bottom of the Shibuyi screen.

2- Next, disconnect the Shibuyi 40S-SA from the electrical current, unplug it or turn off the switch of the strip where it is connected to leave it without electricity.

3- Press the power and volume down buttons of the Shibuyi 40S-SA at the same time, keep them pressed and connect the Shibuyi television to the electrical current.

4- Hold down the power and volume down buttons without releasing them at any time until you see the Shibuyi logo or the Android TV logo.

The moment you see the logo you can release the buttons.

5- The Shibuyi 40S-SA TV will restart and it will take a few minutes or seconds to restore to factory settings, once restored you will have to reconfigure it, choosing the language, internet connection, tuning channels, installing applications or configuring Bluetooth devices.

Has it been useful?

About the device:

The Shibuyi 40S-SA it is a television with the Android operating system, an aspect ratio of 0,67292, a refresh rate of 60 Hz, 2 HDMI ports, 2(Rear) USB ports, a screen resolution of HD Ready pixels, a screen diagonal of 101.6cm (40 inch) cm, Wi-Fi, Ethernet port (RJ45), dimensions of 0 cm width, 0 cm height and 0 cm depth.

Questions and answers from users about "How to reset Shibuyi 40S-SA - Factory reset and erase all data"

There are no questions yet about "How to reset Shibuyi 40S-SA - Factory reset and erase all data", you can write the first one.

Buy related accessories *

* Some of the links in this article are affiliates, which means that when you buy one of those products we will receive a small commission that will allow us to continue offering quality and updated content, and it will not cost you anything since you will continue paying the same price.